MORCEMSEC® MULTIUSAGE GP CSIV W0

Multi-use dry mortar for plastering and masonry works Description Multi-use dry mortar intended for routine masonry work, renderings, plastering and gobetis. It is specially formulated for direct application on brick and concrete supports, offering good workability and excellent adhesion. Composition Product based on: high strength cement sieved aggregates specific adjuvants improving workability and adhesion Areas of application Masonry works in general Traditional coatings Gobetis Coatings on terracotta supports Repair and finishing work Brackets Conventional cement-based supports Brick structures Concrete The supports must be: resistant and stable clean and free of dust free of remains of formwork release agents - organic products or substances harmful to adhesion In case of high heat - wind or very absorbent surfaces - moisten the support and wait for the water film to disappear before application. Do not apply to: plasters painted supports Instructions for use Add clean water and mix manually or mechanically Obtain a homogeneous and manageable consistency Apply the mortar to the support using a smoother For coatings - wait the necessary time before tightening Precautions and recommendations Do not apply at temperatures below 5°C or above 30°C Do not apply if there is a risk of frost - rain - strong wind or direct sunshine For thicknesses greater than 1.5 cm - apply the product in two layers In extreme weather conditions (strong wind or high temperatures) - lightly moisten the product the day after application Presentation and storage 25 kg bags in plasticized paper Storage up to 12 months in original packaging Store away from humidity and bad weather

• علامات تجارية عالمية رائدة
• تصنيع وتوزيع محليان
• مرافقة تقنية