PEGOLAND® PORCELAINEUX C1 TE Adhesive cement

PEGOLAND® PORCELAINOUS C1 TE is a standard adhesion adhesive cement, specially formulated for the installation of low porosity tiles (3%) such as porcelain stoneware and porcelain. Flexible, slip-resistant and with a long open time, it allows precise and comfortable installation, including for laying tiles on tiles. It is suitable for installation on interior and exterior floors as well as interior walls, guaranteeing excellent adhesion and high durability. Key Benefits Special porcelain stoneware and porcelain Low slip (class T) Extended open time (class E) Excellent initial adhesion Good handling and ease of application Compatible with tile-on-tile installation Suitable for low porosity substrates Areas of application Laying porcelain stoneware and porcelain tiling Laying tiles on tiles Interior and exterior floors Interior walls Decorative and technical ceramic coatings Compatible media Conventional cement-based supports Concrete screeds and slabs Cardboard plasterboards Supports required: Resistant, stable and clean Free from dust, oils, form release agents and organic products Presenting adequate flatness Implementation conditions Flatness defects of up to 5 mm can be corrected with the same product 48 hours before gluing For greater thicknesses, use traditional dry mortars or an equalizing paste In case of high heat, wind or very absorbent surfaces, lightly moisten the surface and wait for any film of water to disappear. Outdoors, the support must have a slope of 1% Implementation Add clean water and mix manually or mechanically until you obtain a homogeneous and manageable paste. Leave to rest for 5 minutes, then mix again Apply the product to a maximum surface area of 2 m² using a straightener Comb with a toothed straightener to obtain the appropriate thickness Lay the tiles using pressure and a slight back and forth movement until the furrows are completely flattened. Installation recommendations Respect expansion joints, splitting joints and peripheral joints Respect a minimum joint between tiles of 2 mm Double gluing is recommended for large formats and outdoor installations

• علامات تجارية عالمية رائدة
• تصنيع وتوزيع محليان
• مرافقة تقنية